page_banner

Oil Pump

  • Gear Oil Pump GPA2-16-E-20-R6.3

    Gear Oil Pump GPA2-16-E-20-R6.3

    Gear oil pump GPA2-16-E-20-R6.3 is a common hydraulic pump, which is widely used in the hydraulic system. Its main function is to suck hydraulic oil from the oil tank and deliver pressure to the hydraulic system, so as to realize the power source of the hydraulic system.
  • Main sealing oil pump HSND280-46N

    Main sealing oil pump HSND280-46N

    Main sealing oil pump HSND280-46N is a vertical installation oil pump with side inlet and side outlet. It is sealed with a skeleton oil seal and is mainly configured in the sealing oil system. After being pressurized by the main sealing oil pump, it is filtered through a filter screen, and then adjusted to a suitable pressure by a differential pressure regulating valve to enter the generator sealing pad. The return oil on the air side enters the air separation box, while the return oil on the hydrogen side enters the sealing oil return box and then flows into the float oil tank, and then relies on the pressure difference to flow into the air separation box. The unit is generally equipped with one for operation and the other for backup, both driven by AC motors.
  • EH oil main pump PVH098R01AD30A250000002001AB010A

    EH oil main pump PVH098R01AD30A250000002001AB010A

    The EH oil main pump PVH098R01AD30A250000002001AB010A is a high flow, high-performance pump designed by VICKERS, and is a member of the variable displacement direct axis piston pump. This pump includes the tested designs of other Vickers piston pumps. This pump is efficient, reliable, and has maximum flexibility in use with optional control methods. Before the initial start of the pump, fill the casing with the type of hydraulic fluid used through the highest oil drain port. The shell drain pipe must be directly connected to the oil tank and below the liquid level.
  • EH oil main pump PVH074R01AB10A250000002001AE010A

    EH oil main pump PVH074R01AB10A250000002001AE010A

    EH oil main pump PVH074R01AB10A250000002001AE010A has a flexible and compact design, providing 250bar (3625psi) connection performance and 280bar (4050psi) operation performance in the load sensing system. This design is suitable for higher performance levels required by power intensive machinery to ensure long service life. The pump body has a net weight of 45KG and must be installed horizontally. The high-pressure fire-resistant fuel system is equipped with two PVH074 EH oil pumps, both of which are pressure compensated variable piston pumps. When the system flow changes, Causing an increase or decrease in system oil pressure, the pressure compensator will automatically adjust the plunger stroke and adjust the system pressure to the set value.
  • DC Vertical lubricating oil pump 125LY-23-4

    DC Vertical lubricating oil pump 125LY-23-4

    DC Vertical lubricating oil pump 125LY-23-4 is used to transport turbine oil and various fluid lubricating oils with lubricating functions. It is mainly composed of machine base, bearing chamber, connecting pipe, volute, shaft, impeller, and other components. Before assembling the oil pump, burring and repeatedly clean all parts and components, and confirm that the cleanliness meets the requirements before assembling. It is suitable for supplying normal temperature turbine oil to lubricating systems such as 15-1000MW steam turbine generator units, gas turbine generator units, and power turbines.
  • 25CCY14-190B Jacking oil axial piston pump

    25CCY14-190B Jacking oil axial piston pump

    Jacking oil axial piston pump 25CCY14-190B is a swash plate axial piston pump with oil distribution plate, rotating cylinder and variable head. The pump adopts the optimal oil film thickness design of hydrostatic balance, so that the cylinder block and oil distribution plate, sliding shoe and variable head operate under pure liquid friction. It has the advantages of simple structure, small volume, low noise, high efficiency, long service life and self-priming ability. Axial piston pump has a variety of variable situations to meet the requirements of users. It is widely used in machine tool forging, metallurgy, engineering, mining, shipbuilding and other machinery and other hydraulic transmission systems.
  • F3-V10-1S6S-1C20 DEH system EH oil circulating pump

    F3-V10-1S6S-1C20 DEH system EH oil circulating pump

    F3-V10-1S6S-1C20 circulating pump is used in DEH fuel-resistant oil system. The system is equipped with two main oil pumps, one circulating pump and one regeneration oil pump. Considering the stability of the system and the special properties of the working medium, the system adopts a plunger variable pump and an elastic sleeve pin coupling. The connection between the pump and the motor adopts the flange sleeve connection, which is convenient for the maintenance of the pump and the motor.
  • Oil Transfer Gear Pump 2CY-45/9-1A

    Oil Transfer Gear Pump 2CY-45/9-1A

    The 2CY-45/9-1A oil transfer gear pump (hereinafter called as the pump) is used to transfer various oil media with lubricity, temperature of not more than 60℃ and viscosity of 74x10-6m2/s below. After modification, it may transfer oil media with temperature of not more than 250℃. It is not suitable for the liquid with high sulfur ingredient, causticity, hard particle or fiber, high volatility, or low flash point.
  • HSN series three-screw pump

    HSN series three-screw pump

    HSN series three-screw pump is kind of displacement type low pressure rotor pump with favorable suction capacity. It is applicable to convey various liquid mediums which have lubricating property and do not contain impurities like solid particles, including fuel oil, hydraulic oil, machine oil, steam turbine oil and heavy oil. Viscosity scope of 3~760 mmP2P/s, conveying pressure ≤4.0Mpa, medium temperature ≤150℃.